Applications+ 更多
Applications
+ 更多
1. 1064nm: for treatment of tattoo removal, dermal pigmentation and treating certain pigmentary conditions such as Nevus of Ota and Hori’s Nevus.
(mainly for black and blue pigmentation)
2. 532nm: for treatment of epidermal pigmentation such as freckles, solar lentigo, epidermal melasma, etc.(mainly for red and brown pigmentation)
3. Black Carbon Head(NALR-1320nm): For deep cleaning, skin whitening, skin rejuvenation, shrink pores, acne treatment, wrinkle removal etc.
Working Principle+ 更多
Working Principle
+ 更多
Tattoo removal by Q-switched laser uses a process known as the 'photoacoustic effect'. When the laser energy is absorbed by the tattoo pigment an extremely high temperature is generated - typically thousands of degrees. However, this high temperature is not sustainable and so it 'collapses.'
This produces an acoustic wave to form around the pigment particles. The result of this wave is a shattering of the particles of ink into smaller fragments. The body's own defense mechanisms then remove these smaller particles leaving behind the larger tattoo pigmentation. Subsequent treatments will induce the same 'shattering' effect on the remaining ink particles until they eventually all disappear.
This produces an acoustic wave to form around the pigment particles. The result of this wave is a shattering of the particles of ink into smaller fragments. The body's own defense mechanisms then remove these smaller particles leaving behind the larger tattoo pigmentation. Subsequent treatments will induce the same 'shattering' effect on the remaining ink particles until they eventually all disappear.
Specialty of QM-Q5+ 更多
Specialty of QM-Q5
+ 更多
- New Portable Medical Design.
- No pain, no burn and even no aneasthesia!
- The laser lamp is imported from America. lifetime can reach 1000,000 shots!
- Great Innerstructurer design which achieve the perfect working performance.
Technical Specifications+ 更多
Technical Specifications
+ 更多
Power | 500w |
Laser wavelength | 532nm/1064nm/1320nm |
Pulse Width | 20-30ns |
Spot Diameter | 1-10mm Adjustable |
YAG Bar size | 5mm |
Pulse energy | 1000mj(8Hz) 700mj(8Hz) |
Laser Capacitance | 120UF±5% |
Display | 8’inch True Color(TFT) LCD |
Cooling Level | Air cooling + closed water circulation cooling |
Stand-by Working | Continuously stand-by working for 10-12 hours |
Electrical Requirements | 100/110V, 50-60HZ or 230-260V, 50-60HZ |
Before & After+ 更多
Before & After
+ 更多