QM-230A
QM-230A
Applications
Applications
- Hair removal.
- Skin rejuvenation,
- Pigments removal
- Acnes Removal
- Vascular Removal
- Wrinkle removal.
- Tattoos, Spots,Pigments, Otas Removal(Nd:YAG laser function)
Working Principle
Working Principle
Diode Laser
- Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.
- It is performed using gold standard Triple-wavelength 755nm,808nm,1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.
- Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
IPL
Intense Pulse Light(“IPL”) used broad spectrum of white light and with filters to marrow the spectrum to target specfic chromophores and structures. IPL is a non-invasive skin treatment that emits powerful bursts of light energy to treat unwanted hair, sun damaged skin, and wrinkles, etc. without damaging the surface of your skin, IPL systems use flash xenon lamps to emit micro pulses of light across a broad band of visible wavelengths. IPL work by using particular wavelengths of light that is called by melanin which colors the hair and brown skin and black. Since melanin absorbs light to be warm or hot, that the production of cells called melanocytes and melanin are denatured more produce more melanin. By using gentle pulses of light momentarily to create heat, IPL can permanently disable hair follicles, preventing hair follicles` future growth. The melanin in the hair (which gives it its colour) absorbs the light, which is then converted into heat. This heat is transferred to the growth cells surrounding the root of the hair, disabling them. By the IPL, pigments are Shattered and eliminated out of body via metabolism. At the same time,IPL also helps increase collagen production, which rejuvenates the skin leading to a more youthful, radiant, bright and few fine wrinkle skin. The light with long wavelength can pass through epidermis to the hair follicles deep underneath the skin. At the targeted area, IPL occurs heating to destroy follicles and hair structures leading to permanent hair removal.
Intense Pulse Light(“IPL”) used broad spectrum of white light and with filters to marrow the spectrum to target specfic chromophores and structures. IPL is a non-invasive skin treatment that emits powerful bursts of light energy to treat unwanted hair, sun damaged skin, and wrinkles, etc. without damaging the surface of your skin, IPL systems use flash xenon lamps to emit micro pulses of light across a broad band of visible wavelengths. IPL work by using particular wavelengths of light that is called by melanin which colors the hair and brown skin and black. Since melanin absorbs light to be warm or hot, that the production of cells called melanocytes and melanin are denatured more produce more melanin. By using gentle pulses of light momentarily to create heat, IPL can permanently disable hair follicles, preventing hair follicles` future growth. The melanin in the hair (which gives it its colour) absorbs the light, which is then converted into heat. This heat is transferred to the growth cells surrounding the root of the hair, disabling them. By the IPL, pigments are Shattered and eliminated out of body via metabolism. At the same time,IPL also helps increase collagen production, which rejuvenates the skin leading to a more youthful, radiant, bright and few fine wrinkle skin. The light with long wavelength can pass through epidermis to the hair follicles deep underneath the skin. At the targeted area, IPL occurs heating to destroy follicles and hair structures leading to permanent hair removal.
1064&532nm Q-Switched Working Theory
- The special wavelength of YAG laser can penetrate skin of human body according to the theory and practice of "selective laser decomposing", the instrument uses the laser-wave to break Chromatophore into pieces which can be naturally absorbed by the body. So that it achieves the purpose of de-freckling.
- The Q-switched Nd:YAG laser radiates the light with a specific wavelength in high peak energy pulse; hence the light penetrates the tissue only for an ultra-short nanosecond. The light is absorbed by the pigment tissue and results in an instantaneous blast, that is Light blasting principle. The pigment particles are shattered into fragments, parts of them will be bounced out of the skin and other parts will be split into tiny particles that can be engulfed by phagocytes and then metabolized by the lymphatic system.
- The 1064nm wavelength will shatters and removes the black and blue pigments while the 523nm wavelength will shatters and removes red, pink, purple and brown pigments of the tattoo or other pigmentations without damaging the normal tissue.
Specialty of QM-230A
Specialty of QM-230A
** Unique and Ergonomic design Handpiece.
** IPL handle with 5 filters for different treatments
** Top-level Spare parts adopted, guarantee its golden quality and long-lasting lifetime!
** New Developed 10 inch User-friendly Interface
Technical Specifications
Technical Specifications
System | Diode Laser | ND YAG Laser | Elight (IPL+RF) |
Power | 600W | 500W | 2000W |
Wavelength | 808nm | 532nm/1064nm/1320nm | 480/530/640-1200nm(standard) |
755/808/1064nm | 590/690-1200nm(Optional) | ||
Pulse Energy | 1-166J/cm² | 1000mJ | 1-50J/cm² |
Spot Size/Diameter | Spot size 12*12mm | 1-10mm | 15X50mm/12X30mm(optional) |
Cooling head 25*25mm | |||
Width of pulses | 10-400ms | 20-30ns | 1-10ms |
Frequency | 1-10HZ | ||
Laser Bars | 10 Bars ( Dilas/Coherent ) | ||
YAG Bar Diameter | Φ5 | ||
Display | 10.4 Inch True Color LCD Screen | ||
Cooling Level | 1-5 Levels | ||
Cooling System | Continuous Sapphire crystal cooling+air cooling+closed water circulation cooling (1-5 level adjustable) | ||
Electrical Requirements | 100/110V, 50~60HZ or 230~260V, 50~60HZ | ||
Working time | Continuously 18 hours without stop | ||
Before & After
Before & After
